Classic Coatings Polyurethane-Acrylic Wet-Look High Gloss Sealer is a clear, single component, low VOC, high solids, waterborne, special blend sealer that is designed to be used over all of our stains, polymer-modified cementitious toppings, concrete, and waterborne colorants, concrete, masonry, and sealers. It may be used for exterior & interior applications in a wide range of climates. Classic Polyurethane/acrylic seal is a UV stabilizer and will not yellow. It is formulated primarily to work as a top layer for protection and applies over concrete restoration projects and where a low-maintenance job is desired. It is typically applied with a sprayer or 9”x1/2” nap roller, provided that the surface is properly prepared. It is environmentally safe with low VOC and cleans up with soap and water. Available in clear or solid colors. Caution: Surface is slippery when wet. New concrete must cure for 28 days before the sealer is applied.
FINISH INSPIRATIONClear · wet-look
AI-created application visualization. Color and sheen vary by substrate, preparation, lighting and application. Original packaging and gallery references remain available above.
Sealers / High gloss
Polyurethane Acrylic
Wet-look high-gloss sealer
Enrich the surface with a clear, wet-look finish. This single-component waterborne blend brings a high-gloss top layer to prepared concrete restoration projects.
THE FINISH, CONSIDERED
Plan a project with Polyurethane Acrylic
Suitable for interior and exterior use. Surfaces may be slippery when wet.
