Classic Paver Bond Wet-Look seals & protects pavers from UV degradation & fading. It is environmentally safe with low VOC and cleans up with soap and water. Paver Bond is a single-component, state-of-the-art formula that makes it easy to apply. It darkens the pavers with a wet look & medium Sheen. It is designed for deeper penetration by sealing and interlocking concrete pavers and by stabilizing joint sand that locks it in place. It can enhance color & also be used for porous brick, flagstone, slate & porous concrete. Paver Bond can be resealed years later without stripping by clearing the surface with a pressure washer 2700 PSI. Paver Bond stops sand from being washed away due to regular cleaning and rain. For interior and exterior use. CAUTION: May be slippery when wet. To combat this, we highly recommend adding Classic Gator Grip during the second application of Paver Bond with a 9” nap roller from 3/8” to 1/2”.
FINISH INSPIRATIONClear · color enhancing
AI-created application visualization. Color and sheen vary by substrate, preparation, lighting and application. Original packaging and gallery references remain available above.
Sealers / Medium sheen
Paver Bond
Paver sealer & sand stabilizer
A more composed outdoor surface. Paver Bond enhances paver color with a wet look and medium sheen while helping stabilize the joint sand.
THE FINISH, CONSIDERED
Plan a project with Paver Bond
For properly prepared, porous pavers and compatible masonry. May be slippery when wet.
